Luxan Algae Death 1 Liter For Green Tack Buy?

Algae death against green deposits by Luxan can be applied to control green deposits on various materials such as tiles, paths, terraces, walls, woodwork, glass, tombstones, etc. Application can be done simply by using a pressure sprayer, watering can or by brushing. Remove loose dirt from the surface and rinse (without soap) Then moisten the surfaces to be treated well with the prepared solution Algae Death. After a few days, wipe or spray the dead algae off the surface in no time.

Active ingredients: Quaternary ammonium compounds, benzyl-c8-18-alkyldimethyl, chlorides

Use this product safely. Read the label and product information before use! For application and use, see the legal directions for use/user manual

Dosage

When pouring or brushing, use 30-60 ml of Algae Death per 10 litres of water. 10 Liter is sufficient for approximately 25 m2. Apply the highest concentration on rough surfaces.

When using a pressure sprayer, use 100 ml of Algae Death per 10 litres of water, sufficient for approximately 50 m2.

Brand:

Luxan

Summary:

- Economical in use

- No more algae after a few days

- Can be applied in several ways

Available in:

500 ml

1 litre

Algae death liquid is the remedy to use with a pressure sprayer, watering can or brush